Jump to content
CNCHeaven
Sign in to follow this  
CNCAgent

3D printed Radio Controller - Arduino&NRF24

Recommended Posts

ARDUINO RADIO CONTROLLER - PART LIST

Help me by sharing this post
 

 

This is the aprt list for this project. Make sure you use the same values for all the components. Check all connections and then uplaod the code and test it. You ahev the parts for the transmitter and receiver.

 

For transmitter We need: 
1 x Arduino NANO/UNO: LINK eBay
1 x 3S BMS: LINK eBay
1 x DC connector: LINK eBay
1 x buck/boost converter: LINK eBay
1 x small buck converter: LINK eBay
3 x 18650 battery: LINK eBay
2 x joystick: LINK Aliexpress
2 x toggle switch: LINK eBay
2 x potentiometer: LINK eBay
1 x i2c OLED screen: LINK eBay
1 x NRF24+PA radio module: LINK eBay
9 x push button: LINK eBay
RESISTORS: 1x1K, 1x2K, 2.2x1K, 3.3x1K, 4.7x1K, 5.1x1K, 6.8x1K, 3x10K, 1x20K: LINK eBay
3D case STL files: DOWNLOAD HERE
wire, solder, soldering-iron, 3D case, etc
 

 

 

 

 

 

For receiver We need: 
1 x Arduino NANO/UNO: LINK eBay
1 x NRF24 radio module: LINK eBay
1 x AMS1117 3.3V regulator: LINK eBay
30 x male pins: LINK eBay
1 x drilled PCB: LINK eBay
1 x 10uF capacitor: LINK eBay
wire, solder, soldering-iron, 3D case, etc
 

 

3D printed PLA radio controller tutorial
 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...