Jump to content
CNCHeaven
Sign in to follow this  
CNCAgent

OpenRC Tractor - Must see

Recommended Posts

7fb63b87d73656f2aefa77a4d63342bf_preview_featured.jpg

OpenRC Tractor

https://www.thingiverse.com/thing:1967086

 

or click the link below to download:

OpenRC_Tractor.zip

 

Notes from thingiverse:

 

Summary

As an homage to my father and his first tractor I proudly present my next project, the OpenRC tractor. It's an open source 1/10 scale replica of an original Ebro 160D tractor. I designed it all from scratch and 3D printed all parts. Then, I added some electronics, nuts and bolts and I made it work!
I also prepared some basic instructions and BOM, so you can easily print and assemble your own tractor. It is designed to be easy to print and no supports are needed for any part.

Points to bear in mind:

As part of optional parts, you'll find different optional plates. There is one for Spain and one for Sweden because there are already OpenRC tractors in both countries. If you print your tractor and you would like to have a plate with your country letters, write a comment and I will try to add it.

Recommended motors have poor torque. They work on smooth surfaces but not off-road. I have prepared a mod to upgrade the tractor with a more powerful motor. Check updates.
I used same bearings as OpenRC formula1 to make it easier for those who already have the F1.
And you know what the best thing is? You can design your own tools!

With OpenRC tractor, possibilities are endless, new tools keep coming...so stay tuned!! (see below updates and get more details at (http://www.makitpro.com)
Videos in action
https://www.youtube.com/watch?v=HJo-eUfV0fI
https://www.youtube.com/watch?v=Dlf3Jw0A2M4
https://www.youtube.com/watch?v=Nwje55RMaBw

There is a lot of work put into this project, hope you like it and to see your prints soon!

UPDATE 1:

Get the tractor trailer at: http://www.thingiverse.com/thing:1967778
Get the motor mod to use a standard 540 size motor at: http://www.thingiverse.com/thing:1967812

UPDATE 2:

Get the tractor fertilizer at: http://www.thingiverse.com/thing:1967859

UPDATE 3:

Check updates at http://makitpro.com/index.php/openrc-tractor/

Thanks to ZYYX 3D printer for sponsoring the project. OpenRC tractor project follows OpenRC by Daniel Noree's philosophy and it is licensed under CC-BY-SA 4.0.

Print Settings

Printer:

ZYYX+ 3D printer

 

Rafts:

No

 

Supports:

No

 

Resolution:

0,2-0,3

 

Infill:

20%

 

 

 

 

For more info on the rc tractor visit our rc section here on cncheaven:

https://cncheaven.com/index.php?/forum/18-radio-control-hobby-rc-trucks-cars-aircraft-trains-boats-etc/

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...